FDA CE Medical Non Contact Adult Forehead Thermometer

FDA CE Medical Non Contact Adult Forehead Thermometer

1 second temperature measurement without contact

Measuring distance 1 ~ 5CM, without direct contact with baby's skin, to prevent cross infection.

One-click switch between human / object mode

One machine is multi-purpose, temperature measurement is more convenient, avoiding damage caused by low temperature and high temperature.

Intelligent three-color backlight reminder, easy to judge the baby's body temperature
Green backlight, 32 ° C ~ 37.5 ° C, baby's body temperature is normal
Yellow backlight, 37.6 ° C ~ 38.5 ° C, Pay attention to baby's temperature change
Red backlight, 38.6 ° C ~ 43 ° C, Take your baby to the hospital

Measuring Method

Confirm that the measurement mode at the top of the screen is the body temperature mode. Align the Forehead Thermometer probe to the middle of the forehead and keep it vertical at a distance of about 3-5 cm (Figure 9.1). Press the measurement key, and a beep will display the measured value (Figure 9.2) after about 1 second. The measurement is completed. If the measured value exceeds the temperature alarm point (the default value is 38 ° C), five beep sounds will be issued.
When the ambient temperature change greatly affects the temperature of the forehead, please measure after the earlobe (Figure 9.3).

Product Description

Product parameters
1. Normal use temperature: Ambient temperature: 10 ° C ~ 40 ° C
2. Power: 2 AA batteries (not included)
3. Weight: 172g (without battery)
4. Measurement range:
Body temperature mode: 32 ° C -42.9 ° C
Surface mode: 0°C~100°C
5. Accuracy: 0.3 ° C
6. Power: ≤50Mw
7. Measuring distance: 5CM-15CM
8. Automatic shutdown: 15 seconds

Product Images  

Prompt

1. Before and after use, please keep the sensor and probe cavity clean.
2. Please place the Temperature Gun in a stable environment for use. When the ambient temperature fluctuates greatly (such as from indoor to outdoor), please leave it for about ten minutes to measure.
3. Do not start to measure the body temperature immediately after measuring the temperature of an extremely high or low temperature object, please leave it for ten minutes to measure
the amount.
4. When the measurement object comes from a place with a large temperature difference from the measurement environment, it should stay in the test environment for at least five minutes.
5. Try not to measure with forehead blowing, watering, sweating, applying cosmetics, etc. Do not measure body temperature within 30 minutes after exercising, bathing, or eating.

Maintenance and precautions
Please keep the inner cavity of the sensor and probe clean, otherwise it will affect the measurement accuracy.
Cleaning method:
1. Surface cleaning: Wipe the dirty area with a clean soft cloth or cotton swab and a little medical alcohol or water.
2. Cleaning the sensor and the inner cavity: gently wipe the inner cavity of the probe or the top of the sensor with a clean soft cloth or a cotton swab and a little medical alcohol.
Use it only after the alcohol has completely evaporated.
● Before using, please read this instruction manual carefully, and make sure that the battery is installed.
● It is forbidden to immerse the Infrared Forehead Thermometer in any liquid, and it is forbidden to put it in a high or low temperature environment for a long time.
● It is forbidden to collide, drop or mix sharp objects, and dismantle and
● The thermometer should not be used in sunlight or water.
● Do not use in strong electromagnetic interference environment.
● Place the digital thermometer out of the reach of children.
● It is recommended to practice many times to get familiar with the measurement method and try not to change the factory settings of the product.
● The measurement results cannot replace the diagnosis of the physician.
● No special maintenance is needed during use, please contact the seller or manufacturer if there is a malfunction.
● Please deal with the waste and residue at the end of the service life of the product in accordance with local laws and regulations.

Our Advantages

1. Strong Research and Development Capabilities: In recent years, Hongxiangwen has continuously developed and expanded its product categories. Based on the original Ski Accessories and Support Strap, we have started to enter the medical protection field and developed a series of medical protective materials such as KN95 mask, disposable face mask, infrared thermometer Is committed to protecting your physical health.

2. Good Quality and Reasonable Price: we quote the ex-factory price, and we are a factory, and our price is generally cheaper than a trading company.

3.Customized Service: we can produce according to your design

4. Environmental Protection, non-toxic and easy to use: Our product materials are environmentally friendly and can be reused.

5. Accept small and large orders